Archive for the ‘News & Updates’ Category

4 Tips To Establish A Healthy Pond

Wednesday, September 14th, 2016

healthy pondTo raise healthy game fish you need to provide the right environment for them to thrive. There are four key elements which are considered ideal for a productive and healthy pond that is convenient to maintain. Use these as standards when constructing a new pond, or as guidelines to make improvements to your existing pond.

  1. Pond location

Check the location of your pond. It should be adjacent to a source of clean, clear water. Soil in this area should be at least 30% clay so it will hold water. The watershed should be large enough to keep the pond full – typically 10-30 times the size of the pond. If the watershed is too large, or too close to fertilized cropland or livestock pastures, consider building a ditch around part of the pond to divert some of the water.

  1. Pond structure

Next, look at the banks of your pond. The slope of the above-water banks should be 3:1 or 4:1 to make maintenance easier and to help prevent soil erosion. The minimum pond depth for underwater weed control is 3 feet; information on minimum depth to prevent winterkill in your area is available from local extension agents. Depth should be determined by comparing rainfall to evaporation in your area. Maximum depth is what is reasonable for your pond’s location and, of course, your budget.

  1. Pond drainage

Install a drainpipe that drains the pond from the bottom to make management and maintenance easier. For example, drawing down the water level for three consecutive winters can reduce as much as 90% of undesirable submerged vegetation. Also, the number and size of harvestable game fish usually increases following drawdowns.

In order to protect the nutrient quality of your pond water, it is always better to divert excess water around rather than through your pond. You may also consider adding an emergency drainway in case of heavy rains; do consult your local Natural Resources Conservation Service (NRCS) for information and regulations in your area.

  1. Pond water quality

There are five main factors that determine the overall quality of water in a given pond. These include:

  • Fertility: This is the amount of nutrients in the water available for the growth of microscopic plants called phytoplankton which are the first link in the pond’s food chain. Phytoplankton levels are directly proportional to the number of fish which can be supported by the pond. Fertility may be determined by measuring the depth of visibility. Most recreation ponds should be maintained at moderate to high fertility. This can be accomplished with an initial fertilization and continuous input of fish feed.
  • pH: This is the level of acidity of the water. Most fish prefer a pH of 7 (neutral). While ponds fluctuate on a daily basis, they should be maintained at levels of 6.5 to 9. In areas where the soil is acidic (such as the southern U.S.) or in areas where the soil has little buffering capacity (such as northeastern U.S.), lime may be added to reduce pond water acidity.
  • Alkalinity: This is the measure of the buffering capacity of the water and should be at least 30 parts per million (ppm) for proper phytoplankton growth. Some ponds are naturally well-buffered; others may need periodic liming. Consult your local NRCS, Department of Natural Resources (DNR) or a professional pond management company for advice on this matter.
  • Dissolved Oxygen (D.O.): This is naturally supplied by aquatic plants and phytoplankton, the wind, and wave action at the surface of the pond. This is the oxygen that fish need to survive. An adequate level of D.O. for most fish is 4 ppm; salmon and trout, however, require more than 6 ppm. Keep in mind that some plants that produce oxygen in the sunlight consume it in the dark. So ponds with very high levels of phytoplankton (water that looks like pea soup) are subject to critically low D.O. levels at night and on cloudy days. This can lead to fish kills. Mechanical agitation of the pond water with, for example, paddlewheels or fountains may be used to aerate the water.
  • Temperature: The temperature determines which species of fish will thrive in your pond. Cold-water ponds (remaining under 70° F) are preferred by trout. Bass, bluegill, and catfish prefer warm-water ponds (warming to more than 75° F). Cool-water ponds (in the 65° F – 75° F range) may, depending on the size of the pond, support smallmouth bass or walleye. Some ponds in this temperature range may also support cold and warm water fish. Consult your local extension agency or a professional pond management company for information on species that perform best in your area.

Source: Larry Varner, Purina Animal Nutrition

Will Great Nutrition Guarantee Trophy Bucks?

Monday, September 12th, 2016

Trophy Bucks

Will Great Nutrition Guarantee Trophy Bucks?

If only it were that simple! Great nutrition will give your deer the opportunity to maximize their genetic potential for antler growth, but it is just one (albeit an important one) of many factors that affect deer antler growth. Even assuming that you are providing the best nutrition possible, other things, some within your control and some not, will affect production of trophy racks.

Factors in deer antler growth

General health greatly influences a variety of factors that affect deer antler growth, such as feed intake and hormone production. If your deer are laboring under a parasite load (internal or external), clinical or sub-clinical disease challenges, or have been injured, antler growth will be negatively affected no matter how nutritious the feed because nutrition will be siphoned off to deal with these other issues. Good management must go hand-in-hand with nutrition to get optimum results.

Deer habitat and antler growth

Environmental conditions are also a factor. Climate can affect how much time a deer spends eating, moving around, resting, etc., and how much energy it expends just staying warm or cooling down. Stressors such as traffic or roaming dogs can upset deer, raising blood levels of the stress hormone cortisol and negatively impacting feeding behavior and nutrient usage. Even something like an improper feeder design can affect how much a deer will eat.

Hydration maximizes feed intake in deer

Water availability is critical. Research has shown that in many species of ruminants, if water intake is reduced even minimally, food intake drops also. Water must be fresh, clean, available, and away from stressors that might inhibit a deer’s water intake. Maximizing water intake will help maximize feed intake.

The genetic footprint

Genetics, of course, are very important. If a buck is genetically programmed to be average, then the best feed in the world will make him only average. Keep in mind, however, that a lesser feed will allow him to be only less than average. However, a buck genetically programmed to have a superior rack will not achieve that growth without optimal nutritional support. If you want your bucks to achieve their genetic potential, then you must feed them accordingly.

Population density relative to antler growth

Finally, there are population factors that can affect deer antler growth, primarily population density (how many animals are in a given space) and dominance relationships between bucks. Even mild crowding is a stressor that affects hormone levels, impacts feeding behavior, and leads to increased energy expenditure and even injuries due to increased movement and numbers of altercations. Bucks must be managed with their social hierarchy in mind if injuries are to be minimized and desired breeding strategies achieved.

All in all, while nutrition is extremely important, and great trophy racks will not be achieved without optimal nutrition, management and genetics are also critical to achieving superior antler growth.

Before you head to the deer lease, stop by J&N Feed and Seed in Graham, Texas and pick up Purina Antlermax feed and deer blocks. We’ve got everything you need for a successful hunting season.

Source: Purina Animal Nutrition

All Seasons 600 lb Stand & Fill Feeder

Wednesday, September 7th, 2016

Stand & Fill Feeder

It’s time to get your deer feeders ready!  Looking for a stand and fill feeder?   The All Seasons 600 lb Stand & Fill Feeder  is now available at J&N Feed and Seed. The 600 lb Stand & Fill Feeder maintains the quality and durability of our traditional 600 lb broadcast, while offering you a much safer way to fill your feeder, from the ground, without ladders!  As always, All Seasons feeders are made right here in Texas.

All Seasons Wildlife Feeders are built to hold up to the harshest environments Mother Nature has to offer. Their exclusive designs are made to deliver feed to target animals, while reducing waste on the ground.

Feeder Features:

  • Perforated feed tray to keep feed fresh and dry
  • Can feed up to 6 times a day
  • Dispenses 12 lbs of feed in 10 seconds
  • Skids for easy relocation
  •  Hinged door for easy access to control unit
  •  Low-profile design to allow easy filling from the ground
  •  Feeder stands approximately 6 ft. tall
  • Fits between the wheel wells of a pickup truck for easy transportation

Feeder Includes:

  • ASF timer with motor speed control
  • 12v solar
  • 12v battery
  • Heavy duty cage to protect your feeder components from abuse of large animals and varmints

Yeti Flip Soft-Sided Cooler Is Here

Friday, September 2nd, 2016

yeti flipThe Yeti Flip, personal size soft sided cooler from the folks at Yeti, is now in-stock at J&N Feed and Seed. The Yeti Hopper Flip 12 lets you pack light in a heavy-duty cooler that keeps ice for days and stands up to any adventure.

Like the original Hopper™, the Hopper Flip can withstand serious abuse in the field, even with everyday use. Its wide-mouth opening makes for easy loading and access to your food and drinks. Plus, its compact, cubed body allows for ultimate portability, never slowing you down. It’s the only personal cooler that’s game for full days in the tree stand, early mornings in the duck boat, or afternoons on the water.

J&N Feed and Seed is an authorized Yeti dealer. See us for Yeti coolers, drink-ware and accessories.

Texas Hunter Education: The Simple Way to Avoid a Ticket

Thursday, August 25th, 2016

Texas Hunter EducationReceiving a ticket during a hunting trip is not fun. The number one reason a hunter will receive a ticket is because he or she lacks proof of Texas hunter education. Every hunter, born on or after Sept. 2, 1971, must successfully complete hunter education and carry proof while hunting. If you can’t locate your card, go online and print a duplicate at no charge.

Over 1 million Texans have completed hunter education and the field is a MUCH safer place to be because of it. Speaking of safety, check out this short video of firearm safety tips every hunter should know.

You can take hunter education online or in a classroom, in English or in Spanish. Everyone who hunts with you will feel (and be) safer if you do. Then keep the proof in your pocket and avoid that ticket.

Published courtesy of Texas Parks and Wildlife Department

Get Ready for An Outstanding Dove Season

Monday, August 22nd, 2016

Dove SeasonLast year Texas dove season was good, but the forecast for the upcoming dove season is outstanding. In fact, dove populations are so healthy, the season has been extended to 90 days for the first time in 80 years. This makes it the longest dove season in the country – another reason why the hunting is best in Texas.

Opening day is September 1 in the North and Central Zones, September 23 in the South Zone and the daily bag limit is 15. Check your Outdoor Annual for more details. It’s also a good idea to refer to the dove identifier so you’ll know which birds to avoid. Be sure to have a Migratory Game Bird endorsement and HIP certification if you plan to hunt dove.

If you need a new spot to hunt, check out Walk-in Hunts, the Public Hunting Program that gives you access to over 1 million acres across the state, including areas for dove hunting. Wherever you go on opening day, good hunting!

https://youtu.be/2yq_KGIJcrU

Published courtesy of Texas Parks & Wildlife

 

3 Ways To Win Texas Hunts

Monday, August 22nd, 2016

Win Texas HuntsRegister for your chance to win Texas hunts and a lifetime hunting license from Texas Parks & Wildlife. In appreciation of hunters like you who help keep Texas an ace place to hunt, Texas Parks and Wildlife is offering an awesome new drawing that’s FREE to enter. They’ve also expanded the Lifetime License Drawings, giving you 3 chances to win instead of the traditional 2.

Win Your Dream Year Outdoors – 1 lucky license buyer will win the big shebang: 1 dove hunting trip, 5 fishing trips, $2,000 of Cabela’s gear and more. It’s FREE to enter, you just need a current license. Enter by Nov. 30. Click here to enter.

Lifetime License Drawings – 3 people will win a Lifetime Super Combo License and never EVER have to buy a state license again. Enter by Sept. 30 for the best chance to win. Next drawing is October 31. Only $5 per entry. Click here to read more.

Big Time Texas Hunts – Enter to win 9 different primo hunt packages on top-notch private ranches and wildlife management areas, like this Ultimate Mule Deer hunt. Enter by Oct. 15, just $9 per online entry. Click here to enter.

https://youtu.be/BTddQfIuNJ0

Body Condition Score for Deer

Thursday, August 18th, 2016

Body Condition Score for DeerDo you know how to calculate the body condition score for deer?  Body condition scoring can be a useful tool to monitor the health and condition of your deer. Maintaining optimal body condition in bucks can help to support great antler growth, does may be more fertile with increased potential to produce more high-quality milk which can result in healthy, fast growing fawns.

The Purina Animal Nutrition Body Condition Scoring System allows you to visually score deer based on fat coverage on several key body areas. An ideal Body Condition Scores lies between 3 and 4 and can be as high as 4.5 just prior to the rut, especially in bucks.

Scoring should be done on an annual basis. For does, it’s recommended to score mid-to-late summer. If body condition score is poor, this will give time to adjust nutrition to improve body condition scoring prior to breeding season. For bucks, it’s recommended to body condition score in late winter or early spring. If body condition scores are poor, this will give time to make adjustments to nutrition to improve body condition before antler production begins.

Poor
Deer is emaciated. Majority of ribs are prominent during summer and visible but less distinct in winter. Spine appears sharp with a steep muscle angle and prominent saw tooth appearance form the side. Hip bone is clearly visible with sharp edges, surrounded by sunken muscles at the rump. Tail head is devoid of fat and framed by deep sunken depressions on each side, resulting in sharp looking pin bones. Belly is tucked high with hollow flanks and a sharp shelf. Brisket is thin and narrow.

Lean
Deer is thin. Many ribs visible but not prominent during summer. In winter, ribs are slightly prominent. Spine is evident but not sharp, with a somewhat steep muscle angle and mild saw tooth side appearance. Hip bone is clearly seen, with sharp edges and slightly sunken rump muscles. Tail head displays sunken depressions on each side, with sharp pin bones and a small amount of observable fat.

Prime
Deer is strong, muscular and healthy. Ribs should be slightly visible but not sharp during warmer months. Ribs are nicely covered in flesh and not visible in winter. Spine is visible, but not prominent and surrounded by moderately sloping muscles. No “saw toothing” of the spine is visible. Rump clearly visible but not sharp, featuring flat, angular muscles. Tail head reflects slight hollows on either side, rounded pin bones, and a small bit of fat. Belly has a slight depression with slight shelf and lean appearance with no fat rolls. Slightly rounded brisket.

Heavy
Deer is healthy, but carrying a few extra pounds, considered normal and healthy prior to rut. Ribs are not visible. Spine is not readily seen, with adjoining muscles rising at a gentle slope. Hips are full with hip bone barely visible. Slight depression can be seen beside tail head. Pin bones appear rounded and smooth. Flank is full with no shelf. Slight fat rolls developing. Brisket appears full and rounded.

Obese
Ribs are layered in fat. Spine lies buried in fat, surrounded by rounding muscles with little to no slope. Hip bone is hidden by fat. Rump appears full and overly round. Tail head is covered with rounding at each side, pin bones are buried in fat. Belly is distended, with full flank and no shelf. Fat rolls are clearly evident at the midline and brisket. Does may have reproductive problems.

Monitoring deer utilizing the Purina Animal Nutrition Body Condition Scoring System will help track the health of your animals and allow time to adjust before heading into critical periods of nutritional stress. An ideal body condition score can lead to healthier animals with more production potential that can lead to a healthier bottom line.

Larry Varner – Wildlife Management Consultant for Purina 

When Will My Chickens Lay Eggs?

Thursday, August 18th, 2016

I Chickens Lay Eggsf raising a backyard flock was a treasure hunt, the ultimate prize would be a hen’s first egg. To extend this feeling of exhilaration and help hens produce wholesome, nutritious eggs long-term, care for the flock differently as they begin laying.

The transition from pullet to egg-laying hen often occurs at 4-5 months of age, subject to breed, environment and nutrition. Laying breed pullets will begin laying at about 18 to 20 weeks of age. A rooster is not necessary for egg production.

The first eggs a hen lays may be irregular – possibly small in size, with soft shells, no yolks or double yolks – but, after a week or so, egg production should become more consistent, with peak performance at about 30 weeks of age.

High-producing hens can lay up to 300 eggs per year; however, first year hens may lay fewer: about 200-250 eggs apiece. Because it takes approximately 25 hours for a hen to produce one egg, six eggs per week is an ideal goal.

To help hens reach this target – and stay happy and healthy, consider the following housing and nutrition tips.

Chicken Housing
After moving chicks from the brooder, introduce them directly to the coop that will become their forever home. This helps birds adjust to the coop well in advance of their first lay. Make sure the coop has comfortable nesting boxes that provide privacy to individual hens.

Once a hen begins laying, it’s her tendency to lay in the same spot moving forward. Create several comfortable, clean and cozy nesting areas to prevent hens from becoming competitive in the coop.

A general rule is to provide one 1-foot square nest box for every four or five hens because the flock will take turns using the boxes. Line each nest box with a thick layer of straw or other bedding to cushion the eggs and keep them clean and unbroken. Keep the nests up off the floor in the darkest corner of the coop.

Be sure all the nest areas have a uniform environment. If the hens decide one nest is preferable to the others, they may all try to use that nest, causing themselves stress, which can lead to egg breakage or egg eating. On our farm, we built the nests into the coops. Outdoor access to the nests allows us to collect eggs without disrupting the flock.

When pullets are nearing their first lay, their behavior changes. They may begin spending more time with the rooster, crouching for breeding or investigating the nesting area. At this time, keep hens in the coop for short periods of time. Place golf balls or decoy eggs in the nesting boxes to help the hens understand the use of the nesting boxes.

Chicken Nutrition
Once the first egg appears, the hen’s diet should also be adjusted.

Different nutrients are required to produce eggs as compared to what the pullet needs for growth. Young chicks and pullets need high protein levels as their body and feathers grow. At laying, switching to a complete feed with calcium and omega-3 fatty acids can help hens produce strong shells and nutritious eggs.

  • Calcium: Calcium is essential to form strong egg shells. If the bird does not secure enough calcium from her feed, she may pull the nutrient from her bones, which could eventually lead to a weak skeletal structure. Since egg shells are developed at night, when birds are not eating, a consistent source of slow-release calcium in the diet is important. Oyster shells are the most common and reliable source of slow-release calcium. For strong shells and healthy hens, feed a complete layer feed with 16 percent protein and 3.25-4.5 percent calcium, like Purina® Layena® Premium Poultry Feed or Purina® Organic Layer Pellets or Crumbles. If your layer feed does not include Oyster Strong™ System, supplement the diet with free-choice oyster shells to add slow-release calcium.
  • Omega-3: For even more nutritious eggs, offer laying hens a complete feed that includes flaxseed as a source of Omega-3. For example, when a diet of Purina® Layena® Plus Omega-3 was fed for at least three weeks, those hens produced large eggs (56 g) that contained 250 mg of Omega-3 per egg. 1  For comparison, a typical store-bought egg contains 50 mg of Omega-3 fatty acids per large egg (USDA: National Nutrient Base).  Results may vary with factors such as total diet and hen health.
1When fed a diet of Purina® Layena® Plus Omega-3 exclusively for at least 3 weeks. Based on large egg (56 g). Results may vary with factors such as total diet and hen health. A typical store-bought egg contains 50 mg of Omega-3 fatty acids per large egg (USDA: National Nutrient Base).
Contents courtesy of Purina Animal Nutrition

Big & J BB2 Long Range Attractant

Monday, August 15th, 2016

Big & JIf you want to shoot a big buck, you need to get them onto your property. Lure ’em on with Big & J BB2 Long Range Attractant. In this era of food plots and property management, deer will choose to go to the setup that’s best. BB2 is your secret weapon.  Big & J Long Range Attractant, BB2 Granular,  features a powerful and intense get-noticed aroma that draws deer from far and wide. This natural long-range aroma is the by-product of the proprietary refining process. No artificial ingredients or flavors are added. It’s so long range that even humans can smell it from a relatively long distance.

  • The intense, natural aroma is created through a proprietary refining process
  • Exceptionally high TDN (total digestible nutrition) level
  • Protein-based formula promotes antler growth
  • Keeps deer on your property during the season and all year long

Pick up Big & J BB2 Long Range Attractants and all your hunting supplies at J&N Feed and Seed in Graham, Texas.

Navigation

Share this page

Calendar

Check back for upcoming events.