Training Deer To Eat From A Feeder

Deer and elk have unique nutritional needs at different times of the year, as a result there can be benefits to year-round supplemental feeding to help maintain optimal health. A successful supplemental feeding program is dependent upon on training deer to consume pellets from a feeder, something that does not come naturally to them.

Utilizing the three steps below will help deer transition smoothly onto a supplemental feeding program, helping to ensure the deer’s nutritional needs are met year-round.

1. Choose a high quality deer feed

Select a feed that is formulated to match the unique needs of animals in your area; providing them a high quality diet year round can help maximize production and health. Look for feeds that are well researched and water-resistant, this will help reduce pellet waste and labor.

1. Select a high quality deer feeder

Free-choice self-feeders protect pellets and provide them to deer whenever they want to eat. Because deer eat several times a day, professionally made free-choice feeders (or even trough feeders) can be the best way to feed deer for maximum intake and antler growth.

One free-choice feeder can comfortably feed 25 free-ranging deer if each consumes an average of 1.5 lbs of feed per day. Place your feeders along frequently used runways or trails and be sure to have enough so that deer do not have to travel more than ½ to ¾ of a mile to a feeder. A good rule of thumb is to provide one feeder per 300-400 acres. Never hunt in a feeding area.

For best results, make sure your feeder location provides:

• Easy approach into the wind
• Good visibility
• Access to water
• Easy escape routes near cover
• Good deer traffic

To help keep deer on low or unfenced property, place feeding areas near the center of your land and at least 500 yards from the perimeter, if possible. Do not place feeders along fence lines, roads, power lines or in large openings.

Spin feeders with corn can be a useful tool to attract deer to the area you would like to start feeding with free-choice feeders. Spin feeders toss out grain or pellets at timed intervals. It can be beneficial to mix at least 25% corn with the pellets to maintain good flow through the spin feeder.

Note that corn is extremely low in the nutrients necessary to grow big antlers. In addition, corn can founder and may kill deer if too much is consumed at one time. However, when safely used in moderation, it is ideal for drawing deer to an area and training them to eat pellets.

1. Follow these steps to get deer eating from the feeder

Most deer are not used to seeing pellets, so they must be trained to recognize them as food and to eat them out of a feeder. It is best to start a supplemental feeding program when typical food sources (farm crops, natural vegetation, new food plots or even acorns) are no longer in abundance, such as during winter or drought conditions.

To set-up a feeder, select an area where deer traffic is good, and then follow these steps:

1. Set up a spin feeder to throw out 1-2 pounds of corn every 6 hours, or spread it by hand using gloves or a scoop to limit human scent. This amount will attract them to the area you want to feed. Be sure to have at least one feeding in the middle of the night. Continue this until deer are consistently coming to the area to eat every day. This may take several weeks, depending on deer density, time of year and availability of other food sources.
2. Once deer are consistently coming to the area daily looking for corn, set up a free-choice feeder filled with corn. Hand-toss corn on the ground around the feeder. When you observe deer consistently eating out of the free-choice feeder, stop hand-tossing corn.
3. Once the deer have been eating corn out of the feeder for at least one week, change the self-feeder mixture to 1/3 pellets and 2/3 corn for another  week so the deer can get accustomed to eating pellets. Make sure they clean up the pellets before replacing the mix. If they refuse to clean up the pellets, mix in more corn with the pellets.
4. After deer are cleaning up the pellets, transition to a mixture of ½ pellets and ½ corn for one week. If the deer continue to sort out the corn and leave the pellets, continue to mix corn in gradually reducing the amount of corn until they have access to only pellets.
5. When the deer are consistently cleaning up the mixture and don’t leave any pellets, put 25 to 50 pounds of just pellets in the free-choice feeder. NEVER fill a feeder full of pellets the first time regardless of its size – leave room to mix in a little corn in case the deer regress a bit and stop eating pellets. When they are consistently eating pellets from the self-feeder, you may fill it completely with pellets.
6. Keep feeders clean. Remove old, wet or spoiled feed before refilling, as deer are very sensitive to odors, and damp or spoiled feed may prevent fresh feed from flowing down. Fresh feed will keep deer coming back.

For additional information on training deer or nutrition programs for deer or elk, stop by J&N Feed and Seed.

Will Great Nutrition Guarantee Trophy Bucks?

If only it were that simple! Great nutrition will give your deer the opportunity to maximize their genetic potential for antler growth, but it is just one (albeit an important one) of many factors that affect deer antler growth. Even assuming that you are providing the best nutrition possible, other things, some within your control and some not, will affect production of trophy racks.

Factors in deer antler growth

General health greatly influences a variety of factors that affect deer antler growth, such as feed intake and hormone production. If your deer are laboring under a parasite load (internal or external), clinical or sub-clinical disease challenges, or have been injured, antler growth will be negatively affected no matter how nutritious the feed because nutrition will be siphoned off to deal with these other issues. Good management must go hand-in-hand with nutrition to get optimum results.

Deer habitat and antler growth

Environmental conditions are also a factor. Climate can affect how much time a deer spends eating, moving around, resting, etc., and how much energy it expends just staying warm or cooling down. Stressors such as traffic or roaming dogs can upset deer, raising blood levels of the stress hormone cortisol and negatively impacting feeding behavior and nutrient usage. Even something like an improper feeder design can affect how much a deer will eat.

Hydration maximizes feed intake in deer

Water availability is critical. Research has shown that in many species of ruminants, if water intake is reduced even minimally, food intake drops also. Water must be fresh, clean, available, and away from stressors that might inhibit a deer’s water intake. Maximizing water intake will help maximize feed intake.

The genetic footprint

Genetics, of course, are very important. If a buck is genetically programmed to be average, then the best feed in the world will make him only average. Keep in mind, however, that a lesser feed will allow him to be only less than average. However, a buck genetically programmed to have a superior rack will not achieve that growth without optimal nutritional support. If you want your bucks to achieve their genetic potential, then you must feed them accordingly.

Population density relative to antler growth

Finally, there are population factors that can affect deer antler growth, primarily population density (how many animals are in a given space) and dominance relationships between bucks. Even mild crowding is a stressor that affects hormone levels, impacts feeding behavior, and leads to increased energy expenditure and even injuries due to increased movement and numbers of altercations. Bucks must be managed with their social hierarchy in mind if injuries are to be minimized and desired breeding strategies achieved.

All in all, while nutrition is extremely important, and great trophy racks will not be achieved without optimal nutrition, management and genetics are also critical to achieving superior antler growth.

Before you head to the deer lease, stop by J&N Feed and Seed in Graham, Texas and pick up Purina Antlermax feed and deer blocks. We’ve got everything you need for a successful hunting season.

Source: Purina Animal Nutrition

It’s time to get your deer feeders ready!  Looking for a stand and fill feeder?   The All Seasons 600 lb Stand & Fill Feeder  is now available at J&N Feed and Seed. The 600 lb Stand & Fill Feeder maintains the quality and durability of our traditional 600 lb broadcast, while offering you a much safer way to fill your feeder, from the ground, without ladders!  As always, All Seasons feeders are made right here in Texas.

All Seasons Wildlife Feeders are built to hold up to the harshest environments Mother Nature has to offer. Their exclusive designs are made to deliver feed to target animals, while reducing waste on the ground.

Feeder Features:

• Perforated feed tray to keep feed fresh and dry
• Can feed up to 6 times a day
• Dispenses 12 lbs of feed in 10 seconds
• Skids for easy relocation
•  Hinged door for easy access to control unit
•  Low-profile design to allow easy filling from the ground
•  Feeder stands approximately 6 ft. tall
• Fits between the wheel wells of a pickup truck for easy transportation

Feeder Includes:

• ASF timer with motor speed control
• 12v solar
• 12v battery
• Heavy duty cage to protect your feeder components from abuse of large animals and varmints